EN 12472-2005 对涂层零部件上脱离的镍进行检测时使用的磨损和腐蚀模拟试验方法

作者:标准资料网 时间:2024-05-20 19:31:17   浏览:8751   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Methodforthesimulationofwearandcorrosionforthedetectionofnickelreleasefromcoateditems;EnglishversionofDINEN12472:2006-03
【原文标准名称】:对涂层零部件上脱离的镍进行检测时使用的磨损和腐蚀模拟试验方法
【标准号】:EN12472-2005
【标准状态】:现行
【国别】:
【发布日期】:2006-03
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:磨蚀;磨蚀试验;耐磨蚀;磨料制品;腐蚀;腐蚀试验;精密机械;粒状物;珠宝;金属覆层;镍;镍含量;贵金属;输出;糊料;模拟;眼镜(夹鼻);试验;表;磨损;手表
【英文主题词】:Abrasion;Abrasiontests;Abrasion-resistant;Abrasiveproducts;Corrosion;Corrosiontests;Finemechanics;Granulates;Jewellery;Metalcoatings;Nickel;Nickelcontent;Noblemetals;Output;Pastes;Simulation;Spectacles(eyeglasses);Testing;Watches;Wear;Wrist-watches
【摘要】:
【中国标准分类号】:Y88
【国际标准分类号】:39_060
【页数】:16P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:硅钡合金化学分析方法硫酸钡重量法测定钡量
英文名称:Methods for chemical analysis of barium-silicon the barium svlphate gravimetric method for the detemination of barium content
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 冶金 >> 金属材料试验 >> 金属材料化学分析
替代情况:被YB/T 109.2-2012代替
发布部门:中华人民共和国冶金工业部
发布日期:1997-02-19
实施日期:1997-07-01
首发日期:1900-01-01
作废日期:2013-03-01
提出单位:冶金部信息标准研究院
归口单位:冶金部信息标准研究院
起草单位:峨眉铁合金(集团)股份有限公司
起草人:唐华应、侯文质、税玉华、李先风
出版社:中国标准出版社
出版日期:1997-06-01
页数:4页
书号:155066.2-11642
适用范围

本标准规定了硫酸钡重量法测定钡量
本标准适用于硅钡合金中钡量的测定。测定范围:2.00%~40.00%

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 金属材料试验 金属材料化学分析
MIL-DTL-8777E, WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C (21 MAY 2007) [SUPERSEDING MIL-W-8777C]., This specification covers single conductor wire with a silicone primary insulation capable of continuous operation at 600 volts and a maximum conductor temperature of 200 degrees C (392 degrees F). These wires are suitable for use in aircraft and missiles using any combination of electrical loading and ambient temperature, provided the maximum conductor temperature is not exceeded. The wires covered by this specification are not intended as fire-resistant wires.